Climbing TechnologyInsurer

The CLICK UP is a manual braking insurer, specially designed for climbing on the crag, usable with all single ropes Ø 8.6 ÷ 10.5 mm. It is compact and lightweight, allowing you to secure a first and top-rope climber by maneuvering the rope with both hands, and lowering it. Allows you to give rope quickly and smoothly and stop a fall by simply holding the free side of the rope. Simply press the tool and keep the tension of the rope unloaded with the other hand. Optimised and usable with all single ropes diameter 8.6 ÷ 10.5 mm. If the rope is incorrectly inserted into the device (inverted rope sides), thanks to the special V-braking holes, it still guarantees effective insurance, allowing the companion to be braked and lowered to the ground without any problems. CLICK UP is supplied and must be used with the special CONCEPT SGL HC carabiner, with anti-wear anodizing and ACL system that prevents the possibility of loading on the minor axis.

• Multi-purpose insurance / descender with innovative and compact design (registered design), suitable for use with half-ropes, twin ropes and whole rope, in mountaineering, climbing on multi-pitch sports routes and trad. Intuitive and easy to use it is equipped with modular braking system to optimize braking with any type of rope and allows independent and self-locking second retrieval.
• Insurance of the first rope effectively. Special body design allows you to give rope smoothly, quickly and smoothly;
• When securing the first rope on multi-pull routes with two strings, to give one rope while the other is locked, this manoeuvre makes BE UP unique
• Effective and modular braking of the strings via the specially designed "V" grooves for better braking control when stopping a flight, double rope and second retrieval
• Independent, self-locking recovery of one or two seconds (guide mode). The special geometry of the device and the attachment ring integrated in the body, allow you to effectively retrieve one or two seconds with half ropes and twin ropes of Ø ≥ 7.3 mm. It also allows you to retrieve a second, while the other is hung on the tool;